Volvo Heico C30 SEMA Concept, 2007

Volvo Heico C30 SEMA Concept, 2007

 

Windswept beaches, twisty island roads and outrageous North Shore waves have just landed in the middle of the Nevada desert. Yet this is not a mirage. It's the groundswell of excitement generated by the debut of the breathtaking Volvo C30 by Heico Sportiv. One look at this modified special-version C30 is enough to spark island fever among those longing to leave civilization behind and embrace the Aloha spirit of adventure.

The beauty of Volvo's new C30 is that it begs to be customized. Like a blank canvas or a pristine white sand beach, Heico's designers dressed the solid white flanks of the C30's exterior with a radiant, splashy orange surf-pattern kit. The bright orange wave originates at the lower front fenders, artfully climbs up the doors, crests the edges of the tailgate and wraps neatly around the rear fascia.

Inspired by the well-toned surfers who spend countless hours battling the waves, the Heico C30's refined bodywork is rippling with its own athletic, muscular appearance. Widened fender flares and lower side skirts are painted to match the body for a seamless appearance. The front features integrated spoiler flaps, three larger air ducts, combined fog and cornering lights and a sport grille emblazoned with Volvo's iron mark. A deeper and wider rear skirt frames quad stainless-steel exhaust pipes.

The hunkered-down look is further accentuated by a modified sport suspension with performance shocks and springs that lower the vehicle by 40 mm. An awesome set of 19-inch five-spoke light alloy VOLUTION� V TITAN wheels is wrapped with low-profile 235/35R19 Continental Sport Contact III tires. Bringing the action to a stop is the job of the enhanced four-piston brake system. Ocean-blue painted calipers displaying the Heico Sportiv logo grab onto 326 x 30 mm discs via sport brake pads.

Surfing is a highly addictive sport that's guaranteed to generate an adrenaline rush for the experienced and novice alike. The same can be said about the enhanced capabilities of the Heico C30's modified powerplant. The stock 2.5-liter 5-cylinder turbocharged engine has been massaged to deliver a robust 300 horsepower at 5500 rpm and a stout 309 lb.-ft. of torque at 3500 rpm. So equipped, Heico says this C30 can sprint from 0 to 100 km/h (62 mph) in just 5.4 seconds.

The turbocharger and intercooler have been modified for enhanced performance while breathing is improved via a Heico sport air filter. To ensure that the engine delivers the goods, Heico has fitted an enhanced ECU power upgrade to the show car. Since enthusiasts like to take matters into their own hands, the C30 is equipped with Volvo's slick-shifting six-speed manual gearbox that transmits power to the front wheels. All of the safety features found on the production C30, including Dynamic Stability and Traction Control (DSTC) remain operative on this totally radical ride.

Vibrant sights and sounds of the islands have been lavishly interpreted and applied to the Heico C30's cabin. Open the door and even the most jaded dude or dudette is apt to exclaim "Cowabunga!" The interior takes the orange theme to the next level. Like a spectacular ocean sunset, tropical flowers or custom surfboard, the depth and richness of the hue is sure to cause double and triple takes.

The bespoke high-quality sport bucket seats emblazoned with the Heico Sportiv logos are swathed in rich orange leather with matching orange stitching. But the Heico team didn't stop there. The material also covers the split-folding rear seats, door panels, steering wheel, floor console armrest, shift knob and parking brake handle. Meanwhile, the matching shade of orange has been skillfully applied to the dashboard, floor mats and even the seatbelts.

Building upon the C30's high tech ambience, stainless steel doorsills with the Heico Sportiv logo add to the look of luxury. The C30's signature super-slim center console is covered with brushed aluminum like the production car. The alloy theme continues with Heico's aluminum pedal set, driver's footrest and aluminum door pins.

This specially prepared C30 a concept car is a bit of a misnomer. It's more of an "idea car" that can be replicated by anyone with the desire and motivation to do so. "This is not just a one-off prototype," says Holger Hedtke, president of German tuning and motor sports company Heico Sportiv. "All the performance parts used are available in our tuning product range."

Hummer H3X, 2007

Hummer H3X, 2007

DETROIT - Less than a year after the H3 went on sale, HUMMER is unveiling a new model called the H3x. It is based on the H3 Street concept shown at the automotive industry's annual Specialty Equipment Market Association (SEMA) show in November.

The 2007 H3x, designed to appeal to buyers with an interest in a customized appearance, injects new energy into the HUMMER lineup, while delivering the brand's trademark iconic bold design and unmatched off-road prowess.

The H3x begins with an H3 equipped with the Luxury package, chrome tube steps, chrome appearance package and chrome fuel door. The package also includes a body-color grille and spare tire cover, unique tires, wheels and center cap, and a brush guard. The interior features embroidered headrests.
* H3X was initially called the H3 Street.

Daihatsu Sirion, 2007

Daihatsu Sirion, 2007

The new Daihatsu Sirion is a totally differently proportioned car to its predecessor and more closely matches the Nissan Micra for length, width and height but with passenger space rivalling the considerably longer Honda Jazz.
For example its front and rear tracks - at 1,460 and 1,465 mm - are 65 and 60 mm wider than before. The Sirion's length of 3,600 mm is actually 95 mm shorter and even 20 mm less than the Ford Ka.
However, the wheelbase of 2,430 mm is 85 mm longer than the old model and the 1,665 mm width is 70 mm more and even 5 mm greater than the Toyota Yaris, Nissan Micra and Fiat Punto. Height grows by 100 mm to 1,550 mm - 10 mm greater than the Micra.

Impressive Interior Space
The new Daihatsu Sirion has occupant legroom and headroom from the next-size-up. Its interior width of 1,400 mm is 70 mm greater than before and 10 mm more than the Toyota Yaris.

A 590 mm seat height allows easy entry and exit aided by wide-opening doors. The rear doors, for example, open to 80 degrees.
The interior length of 1,830 mm is 20 mm more than the Yaris while the interior height is also greater than the Toyota.
Luggage space is also impressive. With both rear seats up it measures 225 litres (VDA) compared to 205 litres for the Yaris. However, with the seats folded, this rises to 630 litres - 80 litres more than the Toyota.

World-Class Engines
The new Daihatsu Sirion boasts two of the world's most efficient 1.0 and 1.3 litre petrol engines, combining strong driveability with ultra-low fuel consumption and exhaust emissions.
Both offer punchy throttle response at town speeds, reducing the need for constant gear-changes, yet are especially sweet-spinning on the motorway, allowing the keener owner to exploit their eagerness to rev during brisker driving. Both are also Euro4-compliant.

All-New One Litre
The three cylinder, twin-overhead camshaft 1.0 litre is all-new and is bigger than before with a 998 cc capacity (was 989 cc), and a slightly smaller 71 mm bore and longer 84 mm stroke (was 72 x 81 mm).

This gives greater low-speed torque or pulling power, while the Dynamic Variable Valve Timing (DVVT) allows a wider spread of high-end power and low-speed flexibility.
The new 12-valve 1.0 litre's maximum power of 69.3 PS at 6,000 rpm is exceptionally high for its size, while the 69.3 lb.ft torque is also impressive - especially at an accessible 3,600 rpm. The compression ratio is 10.5:1.
Featuring compact combustion chambers and an offset crankshaft, this engine employs resin-coated pistons and low-tension piston rings for reduced internal friction.
Both head, block and even oil-pan are made from lightweight but rigid aluminium, contributing to low vibration and quietness.

Unrivalled Performance, Economy And Emissions
No rival can match the new Daihatsu Sirion 1.0 litre's performance, fuel economy and low emissions.

The top speed is a remarkable 99.4 mph with a 0-60 mph time of 13.5 seconds. Fuel consumption is an outstanding 46.3/64.2 and 56.5 mpg on the Urban/Extra Urban and Combined Cycles.
An exceptionally low CO2 emissions of 118 g/km means the car qualifies for a Road Fund Licence charge of only �75 for 12 months plus �38 first registration fee (AA band up to 120 g/km). This places it in a category largely dominated by hybrids - and the smaller Daihatsu Charade, of course.

Thoroughly Revised 1.3 Litre
The new Sirion's four-cylinder 1.3 litre engine has been thoroughly revised to provide stronger low-speed torque and a more useable power delivery in day-to-day driving.
Still featuring Dynamic Variable Valve Timing (DVVT) and twin overhead camshafts, this basic engine is also supplied to Toyota by Daihatsu for use in its Yaris supermini.

In the new Sirion's application, power is 87 PS (was 102 PS) but at 6,000 rpm instead of 7,000 rpm. Torque is the same 88.5 lb.ft but at a much more useable 3,200 rpm instead of 4,400 rpm as in the previous model.
With a compression ratio of 10.3:1, this compact, light, all-alloy engine has bore and stroke dimensions of 72 x 79.7 mm and - like the 1.0 litre - employs durable chains for its camshaft drive.

Top speed for the manual is 106 mph with the four-speed automatic only slightly slower at 102 mph. The former has a 10.9 second 0-60 mph time while the automatic takes 12.6 seconds.
Fuel economy is outstanding for both at 37.7/58.9 and 48.7 mpg on the Urban/Extra Urban and Combined Cycles for the manual and 32.8/54.3 and 44.1 mpg for the automatic. CO2 emissions are among the lowest in the Daihatsu Sirion's class at 137 and 151 g/km respectively.

World's First Self-Regenerating Catalyst
The new Daihatsu Sirion 1.3 litre features the world's first self-regenerating catalyst. This effectively extends the life of the catalytic converter, reducing maintenance costs.

It also is kinder to the environment as it keeps the catalyst 'healthier' over a higher mileage meaning the already low 137 g/km CO2 emissions do not increase as the engine becomes older.
This revolutionary technology works by providing a self-regenerating capability in the particles of the precious metal which normally degrades.
Using nanotechnology, the intelligent catalyst incorporates metallic ions of palladium, the most heat-sensitive of the metals used in a catalytic converter.
According to temperature and available oxygen, the particles turn in and out of a crystalline state therefore regenerating and prolonging the 'cat's' ability to clean exhaust gasses.

European-Tuned Chassis
The new Sirion's suspension has been thoroughly proven on a variety of European roads and tuned for suppleness and stability.

The front employs MacPherson struts and coil springs while the rear uses the equally popular and well-proven semi-independent torsion bar system with separate coil springs. With almost vertically-mounted shock-absorbers, this reduces the transmission of road noise and makes the damping more effective.
Unusually for a small car, anti-roll bars are fitted to both the front and rear suspension, while the front suspension stroke is especially long to improve ride comfort. The front also uses ball-joints for its anti-roll bar which also enhances ride and handling.
Special features at the rear include a lengthened suspension stroke and more rigid bearings to improve stability.

To optimise fuel economy the new Daihatsu Sirion uses an electric motor for its standard power steering. This is more efficient than the conventional power-sapping hydraulic system.
However, many electric power steering set-ups are criticised for their lack of feel so Daihatsu's chassis engineers have ensured the new Sirion avoids this failing.
The result of their meticulous fine-tuning is a chassis which is absorbent, well-damped and provides reassuringly progressive body roll during brisk cornering.
Straight-line stability is especially strong and the steering self-centres well, avoiding the vagueness and lane-wander of some electric systems.

Class-Beating Turning Circle
Despite having one of the widest tracks and bodies in its sector, the new Daihatsu Sirion boasts a class-beating turning circle.
Coupled with excellent visibility and a seating position higher than the norm, parking is made that much easier - aided by rear parking sensors on SE models.

In fact, with a kerb-to-kerb turning circle of 9.4 metres, the Daihatsu Sirion is 0.4 metres tighter than the Ford Fiesta or Toyota Yaris, 0.6 metres better than the Vauxhall Corsa and a massive 0.9 metres more agile than the Renault Clio.

Top Level Safety Package
Every aspect of safety has been studied for the new Sirion with the aim of achieving 4-stars in the Euro NCAP tests.
The body was subjected to the world's most rigorous crash tests including full-on frontal and side-impact collision tests at 55 km/h, a rear impact at 50 km/h and a frontal offset collision test at 64 km/h.

In addition, the new Daihatsu Sirion was deliberately crashed against much larger cars to ensure its compatibility in 'real-life' accidents.

All main frame members are straight, joint rigidity is optimised and suspension mounts reinforced. High-tensile steel is used where needed and bonnet and bumpers are designed to lessen injury to pedestrians.
The door pillars and roof sides have special ribs which reduce possible head injury while both the brake pedal and steering wheel have been designed to avoid intruding during a frontal impact.

Standard on all models are driver, passenger and - unusually at this price - side airbags, while the front seatbelts have pretensioners and force-limiters.
The three rear seatbelts all boast three-point location plus ISOFIX for the outer belts. This gives better location for child safety seats. There are a total of five height-adjustable head-restraints.
The new Sirion's anti-lock ventilated front disc and rear drum brakes (ABS) are aided by Electronic Brakeforce Distribution (EBD). This optimises braking force according to the weight distribution of passengers and luggage.

Unbeatable Equipment Levels
There is no such thing as a 'basic' entry-level Daihatsu Sirion despite prices starting at �6,995 OTR. Every model has unbeatable equipment levels.

For example, standard for all - including the Sirion 1.0 S - is air-conditioning, a radio/CD player, ABS with EBD, power steering, four electric windows, front and side airbags and remote central-locking.
The Daihatsu Sirion 1.3 S adds, for example, rear speakers, electric door mirrors, driver's seat height adjustment, chrome interior door handles and a front passenger seat back pocket.

Extra equipment for the Sirion 1.0 SE includes alloy wheels and rear parking sensors while the Daihatsu Sirion 1.3 SE adds a pod-like rev-counter, colour-keyed exterior door handles and black window surround.
Like all Daihatsus, the new Sirion offers customers the reassurance of a three year unlimited mileage warranty with roadside assistance plus an eight year anti-perforation warranty - two years longer than before.
The Daihatsu Sirion also boasts highly competitive insurance groups of 4D for the 1.0 S, 5D for the 1.0 SE and 6D for the 1.3 - both helping reduce running costs.

Daihatsu Terios, 2007

Daihatsu Terios, 2007

 

 

Designed to appeal to young families and older people seeking the traditional 4x4 qualities of visibility, bad-weather traction and versatility, the Daihatsu Terios also offers small car running costs and manoeuvrability.
Its turning circle is a tight 9.8 metres (kerb-to-kerb) for the S and SE and a still hatchback-like 10 metres for the bigger-tyred SX, while the SX body length is between that of the new Renault Clio and larger Megane.

Compared to the previous model, the Daihatsu Terios 1.5 SX is 230 mm longer at 4,075 mm and a significant 190 mm wider at 1,745 mm. It is 45 mm higher but purely because of its standard roof rails. The entry-level 'S' model - which lacks roof rails - is actually 5 mm lower than before.

Greatly boosting the new Terios's tough, stable stance are front and rear tracks measuring 1,450 and 1,480 mm respectively - a massive 145 and 170 mm greater than before. Meanwhile, the wheelbase - at 2,580 mm - grows by 180 mm.

Complementing this are especially large 16 ins wheels for all models with either 215/65R tyres for the entry-level Terios 1.5 S manual and higher-spec SE automatic or beefy 235/60R tyres for the manual SX.

Versatile Interior
The versatile interior offers mid-sized hatchback passenger space with a clever split fold-and-tumble rear seat which liberates a 1,290 mm maximum floor length - long enough to take a mountain bike.
Even with the rear seat in use the 380 litre capacity boot is capable of taking four 45" golf bags, four vertically-stacked mid-sized suitcases or a typical baby buggy. Most models also have load-floor securing hooks.

Sprightly, Efficient Powertrain
Based on the Sirion's 1.3 litre DOHC 16-valve petrol engine, the Daihatsu Terios has a larger 1.5 litre capacity, producing 105 PS at 6,000 rpm and a flexible 103 lb. ft of torque at 4,400 rpm.

Its standard Dynamic Variable Valve Timing (DVVT) enhances low-speed pulling power and high rev throttle response by maximising combustion efficiency. It also boosts fuel economy and lowers exhaust emissions.

The new Terios's engine - with the same 72 mm bore as the 1.3 litre but a longer 91.8 mm stroke - is both lively and flexible, requiring fewer gear-changes to make sprightly progress.
For example, its torque curve is virtually flat between 3,200 and 4,000 rpm - the most frequently used rev-range in normal driving.

Top speed for manual models is almost 100 mph and over 93 mph for the automatic, while the Daihatsu Terios 1.5 S manual records 40.4 mpg on the Extra Urban Cycle and the Terios 1.5 SE automatic not far behind at 39.8 mpg.
The new Terios 1.5 S manual has a low CO2 reading of 186 g/km with the Terios 1.5 SE automatic recording 196 g/km.

In fact, the Daihatsu Terios 1.5 S has the best CO2 reading of any four-door 4x4 - diesel included - and comfortably beats rivals such as the Suzuki Grand Vitara, Mitsubishi Shogun Pinin and Honda HR-V.
The short-throw five-speed manual gearchange is light and slick, while the four-speed automatic is both quick-reacting yet capable of selecting a higher gear during more gentle driving, aiding fuel economy and refinement.
Meanwhile, all new Terios models have a full-time 4WD system with a fixed 50/50 front to rear torque-split and centre differential which eliminates axle wind-up - the phenomenon of the steering becoming increasingly heavy on full-lock.

Because of this 50/50 torque split, high-speed stability and slippery surface traction is greatly enhanced compared to most rivals. These models are usually rear-wheel drive with selectable 4WD or effectively front wheel-drive, only calling on 4WD when sensors detect wheelspin.

A fascia-mounted switch activates the electronically-controlled differential-lock. This further aids traction in mud or deep snow, while short front and rear overhangs and a 190 mm ground clearance also signal serious off-road ability. The new Daihatsu Terios has a front approach angle of 38 degrees with a rear of 37 degrees.
The compact engine is mounted in-line, followed by the gearbox. A centre differential transfers torque to both the front and rear axles via two separate propeller shafts.

Sporty Handling From New Chassis
The new Daihatsu Terios benefits from a totally new monocoque platform with a revised chassis tuned for car-like, confidence-inspiring handling with vastly improved ride and stability compared to the previous model.

Aided by its considerably wider front and rear tracks, the new Terios features front MacPherson struts, lower wishbones and an anti-roll bar.
The five-link rear suspension has variable-rate coil springs and near vertical rear shock-absorbers which improve damping and therefore comfort, pitch and roll.
Compared to the old Terios, the front anti-roll bar is of a new design, the revised hydraulic power-assisted rack-and-pinion steering gear achieves excellent accuracy and feel, while the bump stops better control axle articulation.

In addition, an increased shock-absorber rebound stroke improves rough terrain driveability.

At the rear, a new lateral rod reduces axle squirm and benefits refinement, a newly-designed upper control arm enhances stability, a new shock-absorber reduces brake judder and a longer suspension stroke improves ride comfort.
Other rear suspension improvements include a more compact design resulting in a lower boot floor and a new design of spring and lower control arm which reduce rear differential noise.

Outstanding Safety Measures
The Daihatsu Terios has outstanding safety measures with in-house tests giving results equal to a Euro NCAP 4-Star occupant protection and 3-Star pedestrian protection.
Crushable structures are used at the front and rear of the body with the cabin itself made stronger to minimise occupant injury. To protect from side-impacts, the front floor cross-member, tunnel, sills, B-posts and roof-side rails are all strengthened to secure occupant survival space.

As for pedestrians, the front bumper and bonnet are designed to minimise injury to the head and thigh with a shock-absorbing structure built into the bonnet.
High-power seatbelt pretensioners are standard while special pads are installed to reduce injury to occupant knees, torso and lower legs. The pedals are also designed not to intrude during an impact.
Both driver, passenger and side airbags are fitted and the standard four-channel anti-lock brakes (ABS) also feature electronic brakeforce distribution (EBD) which maximises stopping power and minimises skidding.

Outstanding Equipment
Every new Terios model has an outstanding equipment tally with the entry-level Terios 1.5 S featuring air-conditioning, power-steering, ABS with EBD, full-time four-wheel drive with centre diff-lock, driver, passenger and side airbags, three rear-seat three-point seatbelts, radio/CD player, four electric windows and reverse parking sensors.

Expected to be the best-seller, the Daihatsu Terios 1.5 SX adds, for example, alloy wheels with 235/60R tyres, two-tone wheelarch extensions and side-skirts, roof rails, multi-information display, front fog-lamps, smoked 'privacy glass' for the rear side doors and rear window, leather steering wheel, electric windscreen de-icer and door mirrors and various AC sockets and load-restraint ties.
The automatic transmission-only Terios 1.5 SE has a similar equipment level to the SX but features a different design of alloy wheel with 215/65 tyres and has colour-keyed side skirts.

Buick Riviera Concept Coupe, 2007

Buick Riviera Concept Coupe, 2007

 

 

 

The Riviera has been engineered to accommodate a new hybrid system.
The fuel-efficient car, which will feature several technological and manufacturing advances.

Exterior Design - A Sense Of Existence, Not Anonymity
The Riviera design is structured around the Buick tri-shield logo, sitting proudly on a trihedral waterfall grille. This takes the traditional Buick treatment to a new level of sophisticated boldness.

The gullwing doors, selected for their exotic appeal, achieve an expansive entrance to the two-plus-two seating configuration. Measuring 1938 millimeters at their widest point, they add to the coupe's sleek sideline. At night, fully opened doors gently shine the "Buick" name on the ground.

The use of carbon fiber in all body panels allowed the designers greater flexibility through reduced mass and added strength. This made the gullwing engineering demands easier to realize and sharp, tight radius curves possible across the body surface.

The Riviera sits on 21-inch 10-spoke forged aluminum wheels, combining polished and satin finishes, with low-profile tires. Taking their cue from Formula One cars, the side mirrors are sweeping yet unobtrusive.

Interior Design : All About Relaxation
In a word - sanctuary. The use of rich blue and subtle creams, representing earth and water themes, are conveyed through high-quality leather bucket seats, plush carpet and a luxurious padded steering wheel. Completing the organic feel, the roof comprises two shaded glass windows offering increased headroom and a celestial connection for occupants.

The interior has no discernable start and finish point for the front and sides, creating a comfortable lounge feel. It is immediately futuristic yet somehow familiar.
The three-dimensional speedometer, inspired by past classics but utterly modern in design, compliments the touchpad styled central console loosely modeled on a computer mouse. An LCD display screen crowns the central console.

Interior designers were encouraged to consider people's personal belongings to enhance their feeling of familiarity and comfort in the vehicle. Continuing the theme of calm simplicity, electronic shifter pads replace the traditional transmission shifter. Controls are kept to a minimum to avoid driver distraction.
Ambient light strips are applied from across the console and inserted on the door liner, stretching to the front seats. Deliberately imitating precious Chinese jade stone, the lights are tinted a subtle icy green, which also offers tribute to a favored color of Buicks in days gone by.

Interior trim treatments befitting the Buick prestige abound - miniature aluminum tri-shields in the front seat headrests, a wooden floor mat in the rear and a rear central armrest which can move sideways left and right to accommodate passengers of different sizes.

Peugeot Flux Concept, 2007

Peugeot Flux Concept, 2007

 

The concept car Flux, designed by Mihai Panaitescu, won the 4th Peugeot design competition. The car was designed to achieve universal pleasure by adapting different lifestyle situations. The theme of this fourth competition, summed up by acronym P.L.E.A.S.E. Innovate!, has inspired creativity of web based designers throughout world, resulting in more than 4,000 projects.

Complimenting present automotive aspirations, Flux has shown the theme�s most relevant illustrations, since its concept corresponds to a type of car that achieves utter driving Pleasure through its Light weight and Efficiency, while at the same time remaining Accessible through the Simplicity and Ecology of its design.

The Flux was chosen by a jury chaired by Fr�d�ric Saint-Geours, General Manager of Automobiles Peugeot and made up of Peugeot representatives, its Style Centre, Xbox, but also of web based people who voted online.

Unveiled at this year�s Geneva show, and thanks to its sophisticated design, Flux will be making a second appearance at the Frankfurt Motor Show. Flux will appear �real� in the form of a full-scale model presented at Peugeot�s exhibition space and �virtual� in a new version of the PGR 4 game on Xbox 360. These two elements constitute the two most fantastic prizes of the 4th Peugeot design competition.

The 4th design competition attracted greater participation, with more than 200 additional projects compared with the 3rd competition (4,029 compared with 3,800), confirming its international appeal, with 113 countries represented as opposed to 107 in the last competition.

SSC ULTIMATE AERO TT, 2007

SSC ULTIMATE AERO TT, 2007

SSC ULTIMATE AERO TT, 2007

Want to drive fast? really seriously fast? you�re spoilt for choice at present � at least in terms of the machinery available, if not the roads to do it on... There�s the 253mph Bugatti Veyron, the 250+mph Koenigsegg CCXR and the Bristol Fighter T with a claimed top speed potential of 270mph, but which will be restricted to 225mph.
There�s also the Hennessey Venom Viper with a claimed top speed of 255mph.

The world�s most powerful production car, ever.
Boasting a truly gargantuan 1,183bhp, the small, little-known Washington State-based company claims a top speed capability of 273mph. In tests earlier this year on a closed section of Nevada highway the SSC managed 230mph in the two miles available, but had the originally intended 12 mile site not been hit by snow, then the Veyron could well have been humbled.

There�s little that�s impressive inside as fit, finish and detailing falls far short of the current supercar norm.
On the plus side the Aero TT is easy enough to climb in and out of, the leather seats are supportive, it�s reasonably spacious with ample headroom and the driving position is fine apart from the front wheel arch intruding into the footwell,

Despite the Aero TT�s massive torque, moving away sedately from a standstill requires a delicate balance of clutch and throttle.
It�s eager either to launch like a dragster, or stall. Despite SSC�s brochure claiming the TT�s rack and pinion steering is assisted.
Manoeuvring at parking speeds required strong arms and a firm, two-handed grip on the wheel, but once rolling the SSC is easy enough to drive with a precise gearchange and direct, accurate steering, even by mid-engined supercar standards.

Specification:
* Engine - mid-mounted, all-alloy 16-valve V8 twin turbo
* Displacement - 6,348 cc (387.2 cu in)
* Power - 1,183 bhp (1,199 PS) @ 6,950 rpm (7,200 rpm redline)
* Torque - 1,094 lb/ft (1,484 Nm) @ 6,150 rpm
* Transmission - 6-speed manual, rear wheel drive
* 0-60 mph - 2.78 secs
* Standing 1/4 mile - 9.9 secs @ 144mph
* 60-0mph - 31.4 metres (103 ft)
* Top speed - 273 mph
* Chassis - steel tube space frame
* Body - carbon fibre composite, flat undertray with venturi tunnels
* Cd - 0.357
* Brakes - 14 inch vented, cross-drilled discs, 8-piston* calipers (front), 6-piston* (rear), (*see text)
* Suspension - double wishbone (front); upper rocker arm, lower wishbone (rear), remote reservoir, adjustable Penske dampers, coil-over springs, anti-roll bar
* Wheels - forged, 3-piece alloy, 19 x 9.5� (front), 20 x 13� (rear)
* Tyres - Michelin Pilot Sport PS2, 235/35 19 (front), 335/30 20 (rear)

Ascari A10, 2007

Ascari A10, 2007

Ascari A10, 2007

The British Supercar manufacturer, Ascari has produced the answer to the Ferrari Enzo FXX.

Whereas the Enzo FXX is not road legal, it was produced to be driven during track days only, the A10 is road legal so can be driven home and parked on your drive.

Designed, engineered and hand built in Banbury, England the A10 has 625bhp and weighs in at around 1200kg, thanks to its lightweight carbon fibre bodywork. Reaching 60mph in just 2.8 seconds and 100mph in less than 6 seconds, the manufacturer claims the A10 is the fastest road going production car around a race track.

The A10 is more than just a revamped KZ1, which has found success in its first year of competing in the GT3 in 2006. It has new body panels, a reworked engine and suspension, with extensive brake modifications to cope with the extra power. Some luxuries such as remote central locking, electric windows and door mirrors, climate control and a Thatcham Category 1 alarm system.

Peugeot 908 V12 HDi DPFS, 2007

Peugeot 908 V12 HDi DPFS, 2007

Peugeot announced its decision to accept a new technological challenge: to win one of the world's most prestigious and demanding motor races, the Le Mans 24 Hours, with a car powered by an HDi diesel engine equipped with a diesel particulate filter system (DPFS).

The monocoque body
The monocoque body is made of carbon and presents a truly closed structure, contrary to the 905, which was a "racing car" with a detachable tubular rollover bar. This type of structure offers strong natural rigidity (the "eggshell" effect) and allows the weight of the monocoque body to be optimised.

Body and aerodynamics
Created from scratch at the beginning of 2006, Peugeot Sport's aerodynamics department had the difficult task of designing in just a few weeks an exterior body that was both original and aerodynamically efficient.
3 months after the appointment of the aerodynamics project team leader, a model of the car was undergoing the first tests in the wind tunnel!
The car's profile results not only from the necessary compromise between aerodynamic efficiency and drag, but also the need to provide optimum airflow to the different radiators and intercoolers located within the generously dimensioned bodywork.

Suspension, steering, brakes
Given the challenge of designing a complete car in record time and the particular constraints of the HDi DPFS engine, the Peugeot Sport team relied on proven solutions for the front and rear suspension design, the electric power steering and the brakes.

The gearbox
This is positioned longitudinally and will allow the fitment of up to 6 gear ratios, the limit laid down by the regulations.
It has been designed to withstand the enormous torque of the engine, while ensuring optimum weight and size characteristics.
The gearbox is controlled electro-pneumatically.

The engine
The chosen engine architecture is a 100� V12 with a capacity of 5.5 litres. This is the maximum capacity permitted by the regulations and was chosen due to its greater internal airflow at low engine speeds. It also gives potential future development opportunities to use different grade fuels.
The choice of a twelve cylinder engine helps keep the cylinder bore diameter very close to that of a production series engine. In doing so, Peugeot can call on its extensive knowledge of diesel combustion and also ensure the engine has a reasonable piston stroke. The V12 architecture, well known for its good balance, also reduces vibrations to a minimum.
The 100� V angle, like the V12 architecture, makes it possible to lower the height of the centre of gravity without affecting the engine's torsional rigidity.
Two diesel particulate filters are located at the end of each exhaust system and guarantee "smoke-free" operation of the engine under all conditions.

The two exhaust systems are as short as possible. On each side a 6 into 1 exhaust manifold is connected to a Garrett turbocharger, then to a very compact diesel particulate filter before ending in a side exhaust pipe, located in front of the rear wheel.
The expected level of performance - a power of more than 515 kW (700 bhp) and a torque in excess of 1200 Nm, which is unprecedented for a diesel engine - is a direct results of Peugeot's diesel engine expertise, combined with the mechanical specification of the V12 engine.

Electronics
The 908 will benefit fully from Peugeot Sport's considerable expertise and knowledge in electronics, acquired as a result of its extensive experience with WRC cars - which are generously equipped with electronic systems - and in particular with respect to their experience of electronically controlled differentials.

Engine
* Rear central longitudinal position
* All-aluminium with one-piece aluminium cylinder block
* 12 cylinders, V angle 100�
* Capacity: 5.5 litre
* Common rail direct injection
* Engine management: Bosch MS17
* Power: 700 bhp
* Torque: 1200 Nm

Transmission
* Gearbox: longitudinal with a maximum of 6 gear ratios. Electro-pneumatic gearbox control
* Differential: self-locking

Suspension, steering, brakes
* Linked front and rear suspension
* Electric power steering
* Michelin tyres
* Wheels: BBS, magnesium
* Length: 4,650 mm
* Width: 2,000 mm
* Minimum weight: 925 kg

Peugeot 308 RC Z Concept, 2007

Peugeot 308 RC Z Concept, 2007

The 308 RC Z concept car is a new Peugeot interpretation of driving pleasure. The car is a 2+2 coup�, with true versatility and at the same time a style that is modern, original and well-balanced.
Attention initially focused on making the vehicle as light as possible by the use of numerous aluminium components, for example the two roll over protection bars that separate the passenger compartment and give shape to the exterior styling, and the use of a polycarbonate rear windscreen and a large number of carbon fibre body parts.

Using the 308 as a blueprint offered a number of benefits:

• to adopt a particularly stylish front design;
• to share a large number of components already developed for the hatchback, therefore simplifying the production of this coup�;
• to capitalise on the hatchback's strong points, which become even more effective in the 308 RC Z concept car (for example, suspension components, wheels, certain equipment items and the fl owing design of the fascia panel).

Exterior styling
The particularly stylish design of the front of the 308 blends brilliantly with the proportions of this concept car.
The Peugeot "Lion" badge is mounted to what can truthfully be called the �nose of the bonnet�. From here, the style lines fl ow upwards back over the bonnet and into the two polished aluminium roll-over protections bars. This fl owing �V� profile gives the vehicle its shape and creates an impression of movement in all positions.

Visually, the fl uidity of the design is further enhanced by the way the large tinted front windscreen, the carbon fibre roof panel and the polycarbonate tinted rear window are combined together.
The "feline-like" front headlights extend along the line of the bonnet. They contain four �cylindrical lights� each which create a bright and piercing beam of light. These "cylindrical lights" are clearly visible due to the clear glass headlamp lenses. The lower front panel differs from that of the 308 hatchback. It has a sharper and sportier shape with a single air intake and integral front fog lamps, while the front grille features chrome detailing.

From the side, the vehicle displays a strong profile with its prominent front wings, deeply sculpted sides, and particularly generous rear wings. The doors raise the visual profile, creating a link between the sloping front design and the curvaceous rear design.
The end result, firmly sitting on 19 inch wheels, suggests power, strength and dynamism, like an animal ready to pounce.

The specific shape of the rear window required the use of polycarbonate instead of glass. The two curved sections emerging from the roof give the vehicle an original appearance and contribute greatly to its aerodynamic efficiency. The design of the tailgate assists the airfl ow over the rear of the vehicle, while the shape of the rear of the vehicle provides sufficient down force onto the rear suspension to eliminate the need for a rear spoiler, thereby preserving the purity of the vehicle's lines.
The Peugeot Lion badge is displayed in a U shaped panel in the centre of the tailgate, and is backlit at night. In addition, simply by pressing the lion badge, opens the tailgate.

The rear lights are mounted fl ush with the car's wide rear wings. Fitted with light emitting diodes (LEDs), they have a ruby red finish combined with a stylised translucent section which contains the direction indicator.
Two centrally mounted exhaust pipes are integrated into the wraparound lower rear panel. To achieve this, the rear exhaust silencer has been located in a transverse position where it also serves as an aerodynamic diffuser, but still allows sufficient space for the storage of a spare wheel.

The rich metallic grey exterior body colour is created by a special process using finely milled metallic particles. This gives the impression that the vehicle has been formed from a single block of metal, enhancing the purity of the car's lines and the styling of the bodywork to remarkable effect.

The interior
The fascia panel in 308 RC Z concept car has been taken directly from the hatchback. A pure, elegant and fl uid design, it allows a particularly clear view of the outside thanks to its sloping design which complements the vehicle's large front windscreen. It offers a high level of interior brightness, improved visibility and an overwhelming feeling of space.
Refl ecting the hatchback, no effort has been spared in terms of the finishing touches and meticulous attention to comfort and convenience inside the car. This is evident in the care given to the styling of each component and the quality of materials used, both in terms of visual appearance and tactile appeal.

The entire fascia panel is trimmed in leather, while the use of chrome, aluminium and black lacquered fittings creates a sporty, upmarket impression. With this in mind, a Bell&Ross� clock has been placed in the centre of the fascia panel, between two air vents, its typography perfectly matching the background of the instrument panel located in the driver's line of sight.
Another sign of the vehicle's exclusive nature are the bucket type front seats with polished aluminium eyelets, the style of which is also refl ected in the design of the inner door panels. The ergonomically designed driver's seat ensures the driver is firmly in control of the vehicle.

The engine
The 308 RC Z concept car is powered by a 1.6 litre THP engine developed from the EP6DTS engine designed and developed via the collaboration between PSA Peugeot Citro�n and the BMW Group, where it is fitted to the 207 RC, with a power output of 128 kW (�175 bhp).
However, the 1.6 litre THP engine, as a result of new engine management software specially developed for the concept car, now produces a maximum power of 160 kW (�218 bhp).
It is characterised by incredible fl exibility, thanks to its maximum torque of 280 Nm produced at a low engine speed (300 Nm in overboost). These values ensure remarkable responsiveness under all driving conditions.

Its innovative Twin-Scroll turbocharger optimally pairs the exhaust gases fl owing from two cylinders to ensure maximum fl ow onto the turbine, while its high-pressure direct petrol injection system improves combustion and overall engine efficiency.
The engine is coupled with an entirely new 6 speed manual gearbox.
This unit helps to give the 308 RC Z a particularly efficient compromise between performance and fuel consumption. For example, its maximum speed of 235 km/h is attained in sixth gear and it takes only 7.0 seconds to go from 0 to 100 km/h. In gear acceleration is impressive: only 7.5 seconds in 5th gear from 80 to 120 km/h. At the same time, fuel consumption is very reasonable with 6.7 litres/100 km in the combined cycle, or just 160 g/km of CO2 emissions.

Wheels and suspension
In the tradition of Peugeot concept cars there is a linked front suspension employing the widespread use of aluminium to reduce the vehicle's overall weight.
This set up ensures exceptional road holding, excellent steering accuracy and great feedback intensifying the overall driving sensation.
The rear suspension, derived from the hatchback, consists of a torsion-beam, two rear suspension arms and an integral anti-roll bar. It has been specially modified to take account of the wider vehicle tracks. Indeed the front and rear tracks have been increased by 59 mm compared to the hatchback, and also the fitment of wider tyres, ensures maximum body rigidity, precision and vehicle stability.
Braking relies on large (360 mm) diameter ventilated discs at the front with four piston calipers.
Polished split rim 19'' alloy wheels are fitted with Michelin Pilot Sport PS2 245/40 R19 tyres.

Safety
Even for a unique model, Peugeot's designers do everything they can to make their dreams become a reality and leave nothing to chance. Safety is also made a top priority.
While the exceptional road holding of the 308 RC Z concept car forms the basis of its primary safety, it is supplemented by safety equipment borrowed from the 308 hatchback, Lane Departure Warning System (LDWS) and the directional bi-Xenon headlamps.

Opel GTC Concept, 2007

Opel GTC Concept, 2007

The GTC Concept embodies the confident, emotional direction we're taking with Opel. Its exciting lines combined with its high driving dynamics and interior flexibility reflect what the Opel brand trademark characteristics will be in the future.

The four-seat coup� is powered by a 220 kW/300 hp, 2.8-liter V6 turbo gasoline engine and features an intelligent, electronically-controlled four-wheel drive system, which provides optimum traction and stability as well as excellent agility in all driving conditions.
Brand-typical on-board flexibility is ensured by the thoughtful "Flex4" system (patent application submitted). The backs of both rear seats can be docked separately to the front seats by remote control, creating a spacious three or two-seater with flat load floor and up to 1020 liters of luggage compartment capacity. As is typical of Opel cars, the seats do not have to be removed or installed.

Dynamic design: Visually communicating the Opel brand promise
The GTC Concept reveals the next-generation of Opel styling. Much like the Opel Speedster did in 1999, or the GTC Gen�ve Concept did in 2003 this car marks a break in the evolution of Opel's design language and signals that the next chapter is about to be written.

Key elements of the silk grey-lacquered Coup� concept car finished with a matte grey paint (length/width/height: 4830/1867/1432 millimeters, wheelbase: 2737 mm) begin with an aggressive front end performance face emphasized by large aluminum vertical intakes that intersect the headlamps. These vertical elements are mimicked in the rear exhaust elements, proposing an unmistakable down-the-road signature performance graphic, coming or going.

The proud front is highlighted by a prominent, trapezoidal grille with signature Opel bar and Blitz, executed in polished aluminum, and gracefully finished with a bolder Opel Blitz emblem concept. The centerline crease coupled with the distinctive aluminum vertical intakes and outboard LED vertical driving lamps choreograph in harmony to visually communicate power and strength. The distinctive design continues with LED technology, enabling creative headlamp inner shapes that propose a night time signature illumination graphic in the front and rear lamps.

The GTC Concept's rear visual solutions strategically echo the design language of the nose with an integrated rear bar and blitz emblem resting on the distinctive Opel rear center crease. Sophisticated surface development sculpturally integrates the rear spoiler into the sheetmetal to visually communicate performance. The rear appearance features Opel signature shaped rear lamps, uniquely displaying a LED night lighting graphic showcasing the exterior brand identity. The smart exterior shape and aerodynamic characteristics are rewarded by the cD value of 0.25.

The Interior design: Warmer and more inviting
Opel's interior designs have progressed to become warmer and more inviting in products like the new Corsa, Antara and Opel GT. However, the Opel GTC Concept significantly represents the next chapter of Opel's interior brand identity. Echoing the exterior, the interior shapes and surfaces are sculpturally-crafted to visually articulate a dynamic driving experience. The dashboard's top-pad wraps around from the instrument panel to the door, embracing the occupants. The sweeping d�cor dynamically stretches one's eye from the surfaces of the door and instrument panel, creating a memorable environment. The horizontal theme is secured with a large integrated centerstack design floating above the d�cor surface, an appearance reminiscent of premium audio equipment.

Intelligent packaging: Compact exterior with spacious, flexible interior
With the lower seating position and vertical hip point ? known as the H-point? , both front occupants sit perfectly integrated in the car. Thanks to the lower-set instrument panel, outward visibility remains excellent. This also provides a generous sense of space, an effect strengthened by its color: the instrument panel's upper section is dark, while the lower section is light.

Powerful engine and intelligent four-wheel drive system
The Opel GTC concept car is powered by a turbocharged, 220 kW/300 hp, 2.8-liter V6 gasoline engine with two variable camshafts, which is combined with a six-speed manual transmission. Maximum torque of 400 Nm is available from 1850 up to 4500 rpm, and accelerating from zero to 100 km/h is calculated to take around six seconds. Top speed is limited to 250 km/h.

The power from the high-tech turbo engine is channeled via an advanced, electronically-controlled four-wheel drive system, which is fully integrated into the car's adaptive IDSPlus chassis management system. An electronically-regulated torque transfer device seamlessly distributes power between the front and rear axles for optimum traction and driving performance. The high-speed control allows more power to be provided to the rear axle before any traction loss can occur, for example during quick acceleration. This creates a driving feel similar to a sporty rear-wheel drive car. An electronically-controlled limited slip differential at the rear axle provides additional stability and traction thanks to torque distribution between the rear wheels.

Major benefits of the Opel GTC Concept's intelligent four-wheel drive system are: optimum traction and stability in all driving conditions as well as excellent agility and an active driving feel.

Mazda Ryuga Concept, 2007

Mazda Ryuga Concept, 2007

MAZDA RYUGA CONCEPT: AN EVOLVED ZOOM-ZOOM

RYUGA ( ree-yoo-ga=Japanese for gracious flow )

The large wheels placed at the far corners of Ryuga's exterior lend a highly stable, balanced stance. The aggressive wedge shape imparts motion even when this sports coupe is parked. Volumes that are small in front, larger at the rear, wrap around and over the wheels to give the exterior tension and direction.

The exterior features:

• Ryuga's side surfaces were inspired by karesansui (Japanese dry gardens). The carefully raked pebbles in these garden s represent peaceful ripples caused by a breeze over a pool of water. The karesansui's man-made image of natural flow is represented in the Ryuga's surface texture to express simplicity and refinement.
• The headlamp shape resembles the flow of morning dew dropping from bamboo leaves. Advanced LED and fluorescent tube technology will enable such a striking design to be used on a production vehicle in the foreseeable future.
• To impart motion, the 21-inch wheel spokes - different on the left and right sides - are slightly twisted as if they're delivering torque. To convey the feeling of gas turbine blades, the trailing edges of the wheel spokes are accented with a tinge of body color.
• Flowing lava inspired both Ryuga's exterior hue and the tail lamp design. Depending on the incident light, Ryuga's surface appears to be shades of yellow, red, and blue, exactly like molten, flowing lava. Notes van den Acker: "The hot red finish goes straight to your heart."
• The roof molding tightens up the flowing cabin and gives an accent to the body styling as well. Cameras located at the forward end of each molding convey rear views to a center cockpit display screen. Turn signals are also integrated into these protruding accents.
• Reflecting its Japanese origin, Ryuga is both simple and complex. While the dominant flow theme is simple, the details - such as the side surfaces and the wheels - are intricate. Solidity and fluidity live here together, in harmony.

FLOW THROUGH INTERIOR
The Ryuga is significantly shorter and lower than today's four-passenger RX-8 sports car, it too accommodates four passengers in roomy comfort. A relatively long (110.2-inch) wheelbase and two large gull-wing doors provide a wide-open invitation to the interior.
The doors rise to expose the interior of Ryuga and allow easy slide-in access, the passengers are presented with the fusion of a cockpit - designed to maximize the emotional connection between the car and driver - with the social atmosphere of the rear passenger space, where lounge-like comfort is ensured through expansive space and Nagare-inspired design.

The front bucket seats provide ample lateral support for energetic driving with the shape of the seats creating an impression of movement which is further emphasized by the patterns in the material.
The experimental 'floating' center cluster allows a high level of interface between the driver and the multi-function touch panel without having to take one's eyes off the road ahead. Information necessary for safe and dynamic driving is available to the driver with RPM and speed (which is shown in both analog and digital format s ) being displayed on the same axis.

Flowing upwards, the center cluster dynamically penetrates the front information panel which reflects Zoom-Zoom futuristic and sporty design craftsmanship, as well as an integrated interface between man and machine. Elongated pods give the cockpit depth while bringing information closer to the driver's eyes. An open-top steering wheel provides enhanced sight lines to the instruments and the road ahead .

THE DRIVING PERFORMANCE ENVIRONMENT AND SAFETY TECHNOLOGIES TO SUPPORT ZOOM-ZOOM

The part of the initiatives, an E85/Gasoline FLEX FUEL engine which runs on sustainable bio fuel could be used in Ryuga. This engine delivers torque and power, balancing driving and environmental performance. Other important features that will support safe driving are the Charge-Coupled Device (CCD) cameras installed for the rear monitoring system and the blind-spot monitoring system. These help ensure safe driving while changing lanes and allow easy identification of potential obstacles. Mazda is working on various technologies to deliver Zoom-Zoom driving in the future, including earth-friendly environmental technologies and people-friendly safety technologies.

To ensure the car provides a Zoom-Zoom driving experience, which is the basis behind all the other features, an open top steering wheel is employed with highly sensitive settings to respond to the driver's smallest input. The car also features steer-by-wire technology and gauges that deliver superbly clear information to the driver. The dramatic wheels with TOYO PROXES 245/35R-21 tires complete the driving experience, and the sophisticated original tread pattern perfectly suits the Ryuga's design concept.