Monday, February 25, 2008

MINI JCW Cooper S Hatch and Clubman Revealed for Geneva Debut

Spiced-up versions of MINI's second-generation Cooper S Hatchback and new Clubman models are to debut at Geneva next month, signalling that Chili simply isn't a hot enough specification for the guys over at JCW. The re-Worksed versions carry adapted performance features from MINI's Challenge race car and offer the full range of John Cooper Works body styling upgrades.

JCW have engineered a MINI Challenge for the road, coupling the race car's 211 hp 1.6-litre unit with newly-uprated sports suspension specifically-tuned for Works MINIs, larger disc brakes with uprated red callipers and a strengthened six-speed manual transmission. Prices are expected to start from �20,500 and �21,700 for the hatch and Clubman respectively.

These uprated features, akin to those on its racing-bred sibling, deliver output of 132 hp per litre and an impressive 40 mpg, while straight-line sprints to 62 mph take just 6.5 seconds in hatchback and 6.8 seconds in Clubman form. A new speedo has been designed to cater for the JCW's new 148 mph top speed.

At the touch of a button behind the gear lever, the on-board computer modifies the engine map for sharper steering responses and more dynamic performance, while an 'Overboost' function increases torque from 260 to 280 Nm over short stints. A host of electronic stability programs coset owners, while deactivating Dynamic Stability Control enables grip-enhancing Electronic Differential Lock, improving handling and traction.

But to ensure that their new-generation Cooper S Hatchback and Clubmans look the part are a new range of JCW body styling products. They include CHALLENGE 17-inch Cross-Spoke alloys with run-flats, large polished stainless steel exhaust tips and cooling-enhancing bonnet intake. Piano Black trim, Anthracite roof lining and a 10-speaker audio system head up the interior enhancements, while John Cooper Works branding adorns boot, grille, wheels and doors.

Press Release

The new MINI John Cooper Works on the starting grid at Geneva
Factory-built JCW Cooper S Hatch and Clubman set for summer launch

� Engine modifications deliver 211hp and 0-62 in 6.5 seconds
� Engine, brakes, suspension settings and transmission adapted from MINI CHALLENGE race car
� Dynamic Traction Control makes MINI debut
� Full range of John Cooper Works body styling products available
� On-the-road prices expected to be �20,500 for the JCW Hatch and Clubman at �21,700
� New speedo design to accommodate the higher maximum speed

Production of John Cooper Works-tuned cars is all set to resume at MINI�s Plant Oxford after the launch of the second-generation MINI Cooper S Hatch and new MINI Cooper S Clubman. From July 2008, customers will be able to order factory-built MINIs that produce 211hp and complete a 0-62mph sprint in 6.5 seconds.

Motor sport has heavily influenced the engineering and development of these new MINIs that feature a larger twin-scroll turbocharger and direct petrol injection with common rail. The four-cylinder engine has had the same modifications as the MINI CHALLENGE race car, along with re-engineered brakes, suspension and strengthened gearing. Each upgrade combines to give the car a remarkable output of 132hp per litre combined with 40mpg.

Expected prices on-the-road are �20,500 for the MINI John Cooper Works and �21,700 for the MINI John Cooper Works Clubman. The cars will be unveiled for the first time to the public at the International Geneva Motor Show in March.

Engine

The engine specially developed for the MINI CHALLENGE race car is fitted to the MINI John Cooper Works cars. The basic unit is the 1.6 litre power plant supplied in the standard MINI Cooper S, but modifications have been made to the air filter, air mass meter, exhaust system and catalyst. Air supply to the modified larger turbocharger is increased through fitment of a larger air intake pipe, which in turn creates a quicker induction phase.

The Works engines from Hams Hall also come with reinforced, specially polished pistons, as well as a strengthened cylinder head for optimised stability and a modified cylinder gasket. The intake valves and valve seat rings have also been upgraded with stronger and more resistant materials. This reduces the engine�s compression ratio.

The new Sports exhaust system is instantly recognisable through the large polished stainless steel twin tailpipes. Modification of the exhaust system has also helped to reduce counter-pressure at the point of exhaust gas recirculation. Ducts in the exhaust manifold and turbocharger are split between two cylinders each. Congestion is therefore minimised when air is inducted to the turbocharger and �turbo lag� is virtually eliminated.

The John Cooper Works MINIs are the first models in the range to fulfil all the requirements of the European EU5 emission standards that come into force in 2009.

The material used in machining the turbine has been upgraded specifically for the Works engine, with maximum charge pressure increased from 0.9 to 1.3 bar, in order to maintain the highest possible temperature for a longer period in the combustion chambers. This lengthening of the combustion process helps to achieve the higher torque curve of the Works car at 260Nm at just 1,850rpm. The Overboost function briefly extends this further to 280Nm. This suits the character of a John Cooper Works car perfectly as Overboost is experienced exclusively through increased torque, not on engine output.

Safety and Driving Dynamics

MINI has always had sophisticated driving stability systems as standard. These include ABS Brakes, EBD Electronic Brake Force Distribution, CBC Cornering Brake Control, EDL Electronic Differential Lock, as well as DSC Dynamic Stability Control and Hill Assist. For the first time, DTC Dynamic Traction Control is added to the list.

DTC allows controlled slip on the drive wheels. For example, on a slippery surface, the driver can pick up speed in a controlled manner with the front wheels spinning slightly. When reaching the upper limit, DSC will intervene as usual. But the driver can deactivate the DSC/DTC systems if he wishes by the touch of a button.

In the DSC-off mode, the standard Electronic Differential Lock can be activated and controls cornering at higher speeds. If one wheel loses grip, drive is transferred to the wheel with better grip promoting the car�s traction and pulling force.

Chassis

The Sports Suspension has been specifically tuned for the Works models. However, even greater chassis rigidity can be achieved by ordering through dealerships the John Cooper Works suspension that lowers the entire car by 10mm.

Extra-large disc brakes adorned with uprated red callipers are fitted to Works cars. In addition, inner-vented discs are positioned behind the front wheels. The front discs are 17� in diameter while the rear set measure 16�. The brake discs are approximately 22mm larger than on the standard Cooper S.

Interior

The options included as standard on the John Cooper Works include a leather sports steering wheel, air-conditioning, interior trim in glossy Piano Black and an Anthracite roof lining.

An upgraded sound system is also included in the JCW package and features 10 speakers and an eight-channel amplifier for increased aural pleasure. For the first time, the MINI speedo has been increased to 160mph on the dial to accommodate the higher maximum speed of the JCW.

The six-speed manual gearbox has been strengthened to handle the powerful new engine.

The standard Sports button, located in front of the gear stick, activates a bespoke engine control map which produces even more dynamic performance and sharper steering response.

Exterior

The Works MINIs come with exclusive 17� light-alloy wheels in JCW Cross-Spoke CHALLENGE design, shod with Run-flat tyres, and weigh less than 10 kilos each.

The Works models can be identified by the newly-designed John Cooper Works logo on the boot and grille and wheels, as well as on the door trim.

No comments:

Post a Comment

Super Sport Car Evolution